Control Feed1.94 - App Store

Please wait ... The app listing is being verified for availability.
You'll be able to see results in few seconds.


Publisher Description

Bluetooth Low Energy (BLE) app for connecting to and managing the large array of specialized animal feeders and measurement devices created by C-Lock Inc.

Version History * Improvements to QuickFlux support
** Better warnings for manual control
*** Prevents using manual controls at inappropriate times
** Prevents running auto-recoveries when the system is not ready
** Allows starting/stopping sampling from app
*** starting without an RFID tag specified will have the unit wait for an RFID scan
** More system state information presented
** Removes unused controls 1.94 Aug 27 * Improvements to new product support
* Improved version compatibility behaviors
* Service mode bugfixes 1.90 Jul 15 * Backwards compatibility improvements for older firmware versions
* Added better error handling and reporting for unexpected errors. 1.83 May 4 * Adds backwards compatibility with older unit firmware
** Addresses issues relating to changes to unit configuration service
* Minor internal improvements to logging 1.82 Apr 14 * Adds new product support
* Fixes connection failure related to version info on systems
* Fixes crash related to connecting to heated dish systems 1.79 Apr 6 * Adjusts conversions for some sensors to support alternative sensor configurations
* Adds configuration support for new products 1.76 Feb 13 * Fix for network scanning view not showing nearby public networks 1.73 09/19/2025 * Internal changes in preparation for future features
* Improvements to prevent status bar from covering UI components
* Adds safeguards in network management view to prevent crashes when receiving invalid inputs
* Fix for incorrect load cell labels with SmartScale add-on units.
** Names were 'Front/Back' instead of 'Left/Right' 1.72 09/09/2025 * Full SmartFeed Ultra support
** Voltage readout is now working
** Door state information is now correct
** 'STOP' button should now trigger a 'jam' behavior and stop the motor
** All features should be working now
* Replaces 'Not Uploading' with 'Idle' as the message when a unit is not currently uploading data
* Help and Service Mode menus are now fully scrollable, should help with extremely small screens. 1.69 07/15/2025 * Minor styling changes to improve consistency of display across devices
* New unit type simulator support (experimental, likely changes in next version(s)) 1.67 03/27/2025 * internal permissions changes
** no behavioral/display changes 1.66 11/20/2024 * Improved Network Management UI to prevent modal dialog from extending off screen.
* Keyboard auto-hides in Network Management modal when tapping off of a text input. 1.65 10/09/2024 * Fix a UI regression in the network management view that makes it harder to see the fields when adding a network 1.64 08/08/2024 * adds support for displaying/triggering auto-recoveries from the GF view without connecting directly to the auto-recovery box
* fixes some error handling behaviors to remove some warnings and ensure error dialogs are always shown when something goes wrong while scanning
* improved support for newer products/configurations 1.63 06/10/2024 * Improvements to readability of network management modal dialog.
** Adds shading to distinguish fields from the background
** Increases font sizes
** Adds labeling for some fields 1.57 01/31/2024 * Fixes inconsistencies with product names throughout the application
* Adds official product name for 'SimpleScan' units.
* Adds support for BLE enabled dish heater units
** Allows viewing live thermistor, temp, relay, and error status
** Allows sending on/off commands for relays (may be overridden by temp settings on the dish)
** Allows configuring the WiFi/FID settings for the dish unit 1.56 11/15/2023 * Add support for new systems
* Adjust default auto-recovery duration (300 sec -> 120 sec)
* Add visual feedback to auto-recovery run button 1.52 08/23/2023 * Adds support for auto-recovery system
* Adds support for auto-start generator system
* Adds simulated interfaces for newly supported systems 1.51 04/26/2023 * Changes to service/setup mode to allow (re-)configuration of new model units
* Minor UI changes to improve readability on some screens 1.48 02/02/2023 * Compatibility fixes with old firmware
* Fix for rare crashes when scanner finds a Bluetooth device with an empty service list. 1.47 10/26/2022 * Fix for Incompatible Version screen, previously would display the launch screen and/or a white screen.
** Adds a simulated view for this error screen in the help menu
* Improved logging for connections
** logs remain accessible through the 'view logs' button on the help menu
* Fix for crashes on some simulator views
* Minor UI adjustments for better readability
* Added handling to prevent crash when trying to use the commands under the 'more' button on the scanner page when the system doesn't support the command.
* WiFi (NetworkManagement) page should now properly disconnect instead of giving the 'unexpected disconnection' message.
* Added pressure display to the GreenFeed page
* Added a fix for keyboard issues seen on some older tablets
** now possible to select alternative keyboard type(s) if the keyboard is missing decimal point input
** inputs are now validated to ensure that they do not have unexpected symbols.
* Added confirmation dialog when selecting the 'reprogram concentration sensor' command when connected to a GF unit. 1.46 10/12/2022 * Fix issues with SSF jam reporting.
* Minor changes to improve stability when connecting to multiple systems.
* Adds support for controlling the fistula attachment for GreenFeed units.
** The GreenFeed simulator now shows the fistula attachment as a capability.
* Some small UI changes. 1.35 12/21/2021 * fixes compatibility issues between the app and newer versions of the auto-calibration software. 1.28 08/03/2021 * Adds support for connecting to GreenFeed Auto-Cal boxes.
** supports specifying a new network to connect to, as well as changing the Feeder ID the box is associated with.
* Add checkbox to allow ignoring warnings while zeroing or spanning scales. 1.27 07/13/2021 * move filter and sorting options to the menu bar
** sorting now defaults to ascending order by ID
* Fixed a bug with the zero/span calibration code which wasn't running validation checks.
* Added a hard-cap of 5 units connected at once, with a soft-cap and warning when connecting to 3 or more units.
** The soft-cap warning can be disabled for the current session by checking a checkbox displayed along with the warning. 1.26 06/21/2021



About Control Feed

Control Feed is a free app for iOS published in the Other list of apps, part of Network & Internet.

The company that develops Control Feed is C-Lock Inc.. The latest version released by its developer is 1.94.

To install Control Feed on your iOS device, just click the green Continue To App button above to start the installation process. The app is listed on our website since 2026-10-15 and was downloaded 0 times. We have already checked if the download link is safe, however for your own protection we recommend that you scan the downloaded app with your antivirus. Your antivirus may detect the Control Feed as malware if the download link is broken.

How to install Control Feed on your iOS device:

  • Click on the Continue To App button on our website. This will redirect you to the App Store.
  • Once the Control Feed is shown in the iTunes listing of your iOS device, you can start its download and installation. Tap on the GET button to the right of the app to start downloading it.
  • If you are not logged-in the iOS appstore app, you'll be prompted for your your Apple ID and/or password.
  • After Control Feed is downloaded, you'll see an INSTALL button to the right. Tap on it to start the actual installation of the iOS app.
  • Once installation is finished you can tap on the OPEN button to start it. Its icon will also be added to your device home screen.

Program Details


General

Publisher
Released Date
2026-10-15
Languages
English

Category

Category
Subcategory

System requirements

Operating systems
iOS

Download information

File size
14 bytes
Total downloads
0

Pricing

License model
Free
Price

Version History


Here you can find the changelog of Control Feed since it was posted on our website on 2026-11-06.The latest version is 1.94 and it was updated on Apps112 on 06 November, 2026.See below the changes in each version:

version 1.94

posted on 2026-10-15

Version History * Improvements to QuickFlux support
** Better warnings for manual control
*** Prevents using manual controls at inappropriate times
** Prevents running auto-recoveries when the system is not ready
** Allows starting/stopping sampling from app
*** starting without an RFID tag specified will have the unit wait for an RFID scan
** More system state information presented
** Removes unused controls 1.94 Aug 27 * Improvements to new product support
* Improved version compatibility behaviors
* Service mode bugfixes 1.90 Jul 15 * Backwards compatibility improvements for older firmware versions
* Added better error handling and reporting for unexpected errors. 1.83 May 4 * Adds backwards compatibility with older unit firmware
** Addresses issues relating to changes to unit configuration service
* Minor internal improvements to logging 1.82 Apr 14 * Adds new product support
* Fixes connection failure related to version info on systems
* Fixes crash related to connecting to heated dish systems 1.79 Apr 6 * Adjusts conversions for some sensors to support alternative sensor configurations
* Adds configuration support for new products 1.76 Feb 13 * Fix for network scanning view not showing nearby public networks 1.73 09/19/2025 * Internal changes in preparation for future features
* Improvements to prevent status bar from covering UI components
* Adds safeguards in network management view to prevent crashes when receiving invalid inputs
* Fix for incorrect load cell labels with SmartScale add-on units.
** Names were 'Front/Back' instead of 'Left/Right' 1.72 09/09/2025 * Full SmartFeed Ultra support
** Voltage readout is now working
** Door state information is now correct
** 'STOP' button should now trigger a 'jam' behavior and stop the motor
** All features should be working now
* Replaces 'Not Uploading' with 'Idle' as the message when a unit is not currently uploading data
* Help and Service Mode menus are now fully scrollable, should help with extremely small screens. 1.69 07/15/2025 * Minor styling changes to improve consistency of display across devices
* New unit type simulator support (experimental, likely changes in next version(s)) 1.67 03/27/2025 * internal permissions changes
** no behavioral/display changes 1.66 11/20/2024 * Improved Network Management UI to prevent modal dialog from extending off screen.
* Keyboard auto-hides in Network Management modal when tapping off of a text input. 1.65 10/09/2024 * Fix a UI regression in the network management view that makes it harder to see the fields when adding a network 1.64 08/08/2024 * adds support for displaying/triggering auto-recoveries from the GF view without connecting directly to the auto-recovery box
* fixes some error handling behaviors to remove some warnings and ensure error dialogs are always shown when something goes wrong while scanning
* improved support for newer products/configurations 1.63 06/10/2024 * Improvements to readability of network management modal dialog.
** Adds shading to distinguish fields from the background
** Increases font sizes
** Adds labeling for some fields 1.57 01/31/2024 * Fixes inconsistencies with product names throughout the application
* Adds official product name for 'SimpleScan' units.
* Adds support for BLE enabled dish heater units
** Allows viewing live thermistor, temp, relay, and error status
** Allows sending on/off commands for relays (may be overridden by temp settings on the dish)
** Allows configuring the WiFi/FID settings for the dish unit 1.56 11/15/2023 * Add support for new systems
* Adjust default auto-recovery duration (300 sec -> 120 sec)
* Add visual feedback to auto-recovery run button 1.52 08/23/2023 * Adds support for auto-recovery system
* Adds support for auto-start generator system
* Adds simulated interfaces for newly supported systems 1.51 04/26/2023 * Changes to service/setup mode to allow (re-)configuration of new model units
* Minor UI changes to improve readability on some screens 1.48 02/02/2023 * Compatibility fixes with old firmware
* Fix for rare crashes when scanner finds a Bluetooth device with an empty service list. 1.47 10/26/2022 * Fix for Incompatible Version screen, previously would display the launch screen and/or a white screen.
** Adds a simulated view for this error screen in the help menu
* Improved logging for connections
** logs remain accessible through the 'view logs' button on the help menu
* Fix for crashes on some simulator views
* Minor UI adjustments for better readability
* Added handling to prevent crash when trying to use the commands under the 'more' button on the scanner page when the system doesn't support the command.
* WiFi (NetworkManagement) page should now properly disconnect instead of giving the 'unexpected disconnection' message.
* Added pressure display to the GreenFeed page
* Added a fix for keyboard issues seen on some older tablets
** now possible to select alternative keyboard type(s) if the keyboard is missing decimal point input
** inputs are now validated to ensure that they do not have unexpected symbols.
* Added confirmation dialog when selecting the 'reprogram concentration sensor' command when connected to a GF unit. 1.46 10/12/2022 * Fix issues with SSF jam reporting.
* Minor changes to improve stability when connecting to multiple systems.
* Adds support for controlling the fistula attachment for GreenFeed units.
** The GreenFeed simulator now shows the fistula attachment as a capability.
* Some small UI changes. 1.35 12/21/2021 * fixes compatibility issues between the app and newer versions of the auto-calibration software. 1.28 08/03/2021 * Adds support for connecting to GreenFeed Auto-Cal boxes.
** supports specifying a new network to connect to, as well as changing the Feeder ID the box is associated with.
* Add checkbox to allow ignoring warnings while zeroing or spanning scales. 1.27 07/13/2021 * move filter and sorting options to the menu bar
** sorting now defaults to ascending order by ID
* Fixed a bug with the zero/span calibration code which wasn't running validation checks.
* Added a hard-cap of 5 units connected at once, with a soft-cap and warning when connecting to 3 or more units.
** The soft-cap warning can be disabled for the current session by checking a checkbox displayed along with the warning. 1.26 06/21/2021

Disclaimer


Official App Store Link


We do not host Control Feed on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Apple and passed their terms and conditions to be listed there. We recommend caution when installing it.

The App Store link for Control Feed is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.

If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.





Click stars to rate this APP!

Users Rating:
  0.0/5     0
Downloads: 0
Updated At: 2026-11-06
Publisher: C-Lock Inc.
Operating System: iOS
License Type: Free

TOP DOWNLOADS
in Network & Internet last week